TPS40007DGQG4 Overview

It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control operates at 2.25V~5.5V and has a 2.25V~5.5V supply voltage. Work well in dc switchers with a -40°C~85°C TA. A switching controller such as this can switch at a value of 300kHz . dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Soft Start which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of 10 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. A search for "TPS40007" will reveal other relevant dc to dc converter ics. Switching converter has a total of 10 pins. Test statistics indicate DC regulator outputs 2.5V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 15A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The max frequency of the pmic can reach 350kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 5.5V. In dormant mode, 1.5mA is used. In order to limit the voltage of a dc switcher whose maximum input voltage is 5.5V, it must be limited by the user. There must be a 2.25V supply voltage. Lowest voltage output of the voltage controller must be greater than 700mV.

TPS40007DGQG4 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION

TPS40007DGQG4 Applications

There are a lot of Texas Instruments TPS40007DGQG4 DC to DC converter applications.

• Bending machines
• Automation technology
• Lathes
• Servo drive system
• Large fire protection systems
• Thermal power
• Hydraulic presses
• Motor controller circuits
• Product testing
• Laboratories