TS3A5017RGYRG4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-VFQFN Exposed Pad. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 4:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. 16 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 2.5V voltage supply. A total of 16 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SP4T switching circuits. This multiplexer is composed of 2 circuits. If you are looking for variants of the digital switch, trying search with TS3A5017. The internal resistance of this digital multiplexer is 12Ohm. Please refer to the datasheets for 16 pins functions. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 3.6V in normal situations. Single supply type digital switch with a low cost. 2.3V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 2.5μA current would be sufficient. This analogue multiplexer requires a voltage of 2.3V~3.6V when it drains from a single voltage supply. Putting voltage greater than 7μA on the multiplexer may cause damage. The transfer of data can be performed over 165MHz bandwidths. Multiplexer ics with 8 outputs are available.

TS3A5017RGYRG4 Features

4 Channels
Switch Circuit: SP4T
2.5μA Supply Current
Bandwidth: 165MHz

TS3A5017RGYRG4 Applications

There are a lot of Texas Instruments TS3A5017RGYRG4 Analog Switches & Multiplexers ICs applications.

• Cell phones
• Intelligent PBX
• Communication systems
• 65 V DACs
• Fiber In The Loop (FITL)
• Audio and video signal routing
• Channelized and Unchannelized DS3 applications
• Data switching
• Frame Relay Equipment
• Cable PC