Presented in SOT-23-6, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. Totally, there are 6 terminations. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. An injection of 6 pins is performed into the body of the electrical component. A SPDT switching circuit is used to build these analog multiplexers. TS5A3157 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 10Ohm. You can find the functions of the 6 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. A cost-effective Single supply type analogue multiplexer. 1.65V should be the lowest voltage fed to the electronic component. 2.5μA current would be enough for this multiplexer to operate. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. When the digital multiplexer is charged above 5μA, damage can occur. It is possible to operate 1 inputs. It is possible to transfer data over a 300MHz-bandwidth. You shouldn't miss the additional features of the electrical component, such as: VIDEO APPLICATION. The analog switch ics has 2 outputs.
TS5A3157DBVRG4 Features
1 Channels Switch Circuit: SPDT 2.5μA Supply Current Bandwidth: 300MHz Additional Features: VIDEO APPLICATION
TS5A3157DBVRG4 Applications
There are a lot of Texas Instruments TS5A3157DBVRG4 Analog Switches & Multiplexers ICs applications.
High-Voltage
Sample hold systems
Communications systems
ISDN NT1/TA
Ultrasound
Battery Powered Instruments
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads