MAX4560ESE Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. This electronic part offers high-quality output due to its 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SPDT switching circuit are built. The circuits in this analogue multiplexer number 3. Using the MAX4560 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 160Ohm. Please refer to the datasheets for 16 pins functions. Multiplexers should not be powered above 12V in normal situations. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage the electronic part should receive is 2V. 1μA current would be enough for this multiplexer to operate. Putting voltage greater than 1μA on the multiplexer may cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIt is recommended that you attach at least 2V to your dual power supply. 6V operating voltages can be used with this electrical part.

MAX4560ESE Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current

MAX4560ESE Applications

There are a lot of Maxim Integrated MAX4560ESE Analog Switches & Multiplexers ICs applications.

• Battery Powered Systems
• Data switching
• Video signal routing
• PCMCIA cards
• DSLAMs
• Residential Gateways, Home Gateway/Router
• Battery Powered Instruments
• Avionics test equipment
• PBX interfaces
• Access Concentrators