DG212BDY Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Bulk. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 16. There is an electrical component included in the 16 series. SPST - NO switching circuits are used in these analog switch ics. An switch multiplexer with 85Ohm internal resistance has a value of 85Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 25V in normal situations. Analog switch ics with Dual, Single supply type are cost-effective. 4.5V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 30mA current would be sufficient. Putting voltage greater than 10μA on the multiplexer may cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. With dual power supplies, you should attach at least 4.5V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. A 4 input needs to be operated. The Drain to Source resistance of this electronic component is 85Ohm.

DG212BDY Features

Switch Circuit: SPST - NO
30mA Supply Current
Drain-to-Source resistance: 85Ohm

DG212BDY Applications

There are a lot of Vishay Siliconix DG212BDY Analog Switches & Multiplexers ICs applications.

• Battery-powered systems
• Transmit
• ATM
• Industrial control systems
• SONET
• Communications systems
• Channelized and Unchannelized DS3 applications
• PDAs
• Fiber to the Home
• Precision test equipment