200ns, 150ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE DG308 16 Pins 15V 16-SOIC (0.154, 3.90mm Width)
SOT-23
DG308ADY-T1-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
13 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Number of Pins
16
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2008
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
100Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
600mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
Reach Compliance Code
unknown
Time@Peak Reflow Temperature-Max (s)
40
Base Part Number
DG308
Output
SEPARATE OUTPUT
Pin Count
16
Qualification Status
Not Qualified
Operating Supply Voltage
15V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
36V
Min Supply Voltage
13V
Operating Supply Current
10μA
Nominal Supply Current
1nA
Power Dissipation
600mW
Max Supply Current
10μA
Throw Configuration
SPST
Turn On Delay Time
200 ns
Number of Inputs
4
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
150 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
100Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
78 dB
Channel Capacitance (CS(off), CD(off))
11pF 8pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
200ns, 150ns
Charge Injection
-10pC
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Voltage - Supply, Dual (V±)
±15V
Height Seated (Max)
1.75mm
Length
9.9mm
Width
3.9mm
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
2,500
$1.14750
$2.295
DG308ADY-T1-E3 Product Details
DG308ADY-T1-E3 Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. This multiplexer is composed of 4 circuits. Try searching with DG308 if you're looking for variants. The internal resistance of this digital multiplexer is 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 36V. A cost-effective Dual, Single supply type analogue multiplexer. 13V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 10μA current would suffice. Putting voltage greater than 10μA on the multiplexer may cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIn the case of dual power supplies, you should connect at least 7V. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages of 15V are compatible with the electrical part. There are 4 inputs to be operated.
DG308ADY-T1-E3 Features
1 Channels Switch Circuit: SPST - NO 10μA Supply Current
DG308ADY-T1-E3 Applications
There are a lot of Vishay Siliconix DG308ADY-T1-E3 Analog Switches & Multiplexers ICs applications.
Fiber to the Home
Communication systems
Transmit
ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
Voice over IP/DSL – Integrated Access Devices, Smart