DG408LDQ-E3 Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 16. The electronic part delivers high-quality output through its 8 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. The electrical component body receives 16 pins. The multiplexer consists of 1 circuits. Search with DG408 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 17Ohm. The functions of 16 pins can be found in the datasheets. normally, users should not supply switches with voltages higher than 12V. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 2.7V. An operating current of 700μA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 6V. It is recommended that you attach at least 3V to your dual power supply. Operating the 8 inputs requires 8 inputs. Don't miss this electronic component's additional features, such as: VIDEO APPLICATION.

DG408LDQ-E3 Features

8 Channels
700μA Supply Current
Additional Features: VIDEO APPLICATION

DG408LDQ-E3 Applications

There are a lot of Vishay Siliconix DG408LDQ-E3 Analog Switches & Multiplexers ICs applications.

• Audio/video switches
• Power routing
• Battery Powered Systems
• Channelized and Unchannelized DS3 applications
• Wireless Local Loop
• Avionics and Military Systems
• SONET
• Cellular phones
• Fiber In The Loop (FITL)
• Audio and video switching