105ns, 80ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE DG412 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)
SOT-23
DG412HSDY-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
13 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Number of Pins
16
Weight
665.986997mg
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2016
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
80Ohm
Terminal Finish
MATTE TIN
Subcategory
Multiplexer or Switches
Max Power Dissipation
600mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
Time@Peak Reflow Temperature-Max (s)
40
Base Part Number
DG412
Output
SEPARATE OUTPUT
Pin Count
16
Operating Supply Voltage
15V
Number of Channels
1
Max Supply Voltage
44V
Min Supply Voltage
13V
Operating Supply Current
1μA
Power Dissipation
600mW
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
105 ns
Number of Inputs
4
Voltage - Supply, Single/Dual (±)
12V ±5V~20V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
105 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
35Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
91 dB
Current - Leakage (IS(off)) (Max)
250pA
Channel Capacitance (CS(off), CD(off))
12pF 12pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
105ns, 80ns
Charge Injection
22pC
Crosstalk
-88dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-off Time-Max
90ns
Normal Position
NO
Height
1.55mm
Length
10mm
Width
4mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$2.846435
$2.846435
10
$2.685317
$26.85317
100
$2.533317
$253.3317
500
$2.389922
$1194.961
1000
$2.254644
$2254.644
DG412HSDY-E3 Product Details
DG412HSDY-E3 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component like this is included in the 16 series. Circuits based on SPST - NO switching are used to construct these analog switch ics. If you are looking for variants of the digital switch, trying search with DG412. Internally, this switch multiplexer has a resistance of 80Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 44V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 13V. For this multiplexer to operate, 1μA current would be sufficient. A voltage higher than 1μA may cause damage to the switch multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. When using dual power supplies, you should attach at least 7V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electronic component can function from 15V. There are 4 inputs to be operated.
DG412HSDY-E3 Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current
DG412HSDY-E3 Applications
There are a lot of Vishay Siliconix DG412HSDY-E3 Analog Switches & Multiplexers ICs applications.