ADG201HSKRZ Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 16 pins. Unlike digital switches, these are based on SPST - NC switching circuits. Try searching for the analog switch ic with ADG201 if you are looking for variants. In this multiplexer, the internal resistance is 50Ohm. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 16.5V voltage to the switch device. Dual, Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 10.8V. The analogue multiplexer may be damaged if voltage is greater than 10mA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. For dual power supplies, a voltage of at least 10.8V should be attached. Drain to Source resistance is 30Ohm.

ADG201HSKRZ Features

4 Channels
Switch Circuit: SPST - NC
Drain-to-Source resistance: 30Ohm

ADG201HSKRZ Applications

There are a lot of Analog Devices Inc. ADG201HSKRZ Analog Switches & Multiplexers ICs applications.

• PCMCIA cards
• Isolation
• Automatic test equipment
• FTTH
• PBXs
• Microprocessor Controlled Analog Systems
• Private Branch Exchange (PBX)
• Data Acquisition Systems
• High speed data transmission line cards
• SDH/SONET multiplexers