ADG5207BRUZ-RL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 28-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. There are 28 terminations totally. The electronic part provides high-quality output because it has 8 channels. Into the electrical component body are injected 28 pins. There are 2 circuits in this switch device. Try searching for the analog switch ic with ADG5207 if you are looking for variants. Analog switches have 160Ohm internal resistance. To find out what the functions of 28 pins are, please refer to their datasheets. Users should never supply a voltage higher than 40V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. There should be 9V voltage fed to the electrical part below 9V. 80μA current would be enough for this multiplexer to operate. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 9V voltage attached. This electrical part is compatible with 36V operating voltages. The 16 inputs need to be operated in order to work.

ADG5207BRUZ-RL7 Features

8 Channels
80μA Supply Current
-3db Bandwidth: 145MHz

ADG5207BRUZ-RL7 Applications

There are a lot of Analog Devices Inc. ADG5207BRUZ-RL7 Analog Switches & Multiplexers ICs applications.

• Medical systems
• DSUs
• Communication systems
• PBXs
• Routers
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Cellular phones
• New designs requiring multiplexer functions
• Imaging
• Sample-and-hold systems