MAX326CEE+ Overview

As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to 0°C~70°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. Circuits based on SPST - NC switching are used to construct these analog switch ics. There are 4 circuits in this switch device. Try searching with MAX326 to find analog multiplexer variants. An switch multiplexer with 3.5kOhm internal resistance has a value of 3.5kOhm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 18V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 4.5V. When the digital multiplexer is charged above 30mA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 18V. It is recommended that you attach at least 4.5V to your dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.

MAX326CEE+ Features

1 Channels
Switch Circuit: SPST - NC

MAX326CEE+ Applications

There are a lot of Maxim Integrated
MAX326CEE+ Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement