MAX393CUE+T Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around 0°C~70°C TA is the extended operating temperature. Totally, there are 16 terminations. The electronic part provides high-quality output because it has 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 16 series. Based on SPST - NO/NC switching circuits, these analog multiplexers work. A total of 4 circuits make up this switch device. Try searching for MAX393 variants of the analog switch ic. In this multiplexer, the internal resistance is 35Ohm. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 15V to a switch device. Dual, Single supply type digital switch with a low cost. 3V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 1μA current. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 8V. The voltage should be at least 3V if you are using dual power supplies. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Operating voltages of 8V are compatible with the electrical part.

MAX393CUE+T Features

1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current

MAX393CUE+T Applications

There are a lot of Maxim Integrated MAX393CUE+T Analog Switches & Multiplexers ICs applications.

• CSU
• Optical Applications
• Routers
• Voice over IP/DSL – Integrated Access Devices, Smart
• Fault Tolerant Systems
• Digital Cross-Connects
• RGB switches
• Automotive applications
• Avionics test equipment
• PCMCIA cards