CD74HC273MG4 Overview

The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. It is configured with Non-Invertedas an output. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 2V~6V volts, it operates. In this case, the operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74HC series. There should be no greater frequency than 60MHzon its output. In total, there are 1 elements. The number of terminations is 20. It is a member of the 74HC273 family. It is powered from a supply voltage of 4.5V. Input capacitance of this device is 10pF farads. An electronic device belonging to the family HC/UHcan be found here. Surface Mount mounts this electronic component. Basically, it is designed with a set of 20 pins. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It is designed with a number of bits of 8. There is a 6Vmaximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. There are 2/6V power supplies attached to it. With an output current of 5.2mA, this device offers maximum design flexibility. The number of input lines is 8. There is a consumption of 8μAof quiescent current from it.

CD74HC273MG4 Features

Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

CD74HC273MG4 Applications

There are a lot of Texas Instruments CD74HC273MG4 Flip Flops applications.

• Guaranteed simultaneous switching noise level
• QML qualified product
• Automotive
• Asynchronous counter
• Computing
• High Performance Logic for test systems
• Event Detectors
• Single Down Count-Control Line
• Individual Asynchronous Resets
• Bounce elimination switch