74LVC374ADB,112 Overview

20-SSOP (0.209, 5.30mm Width)is the packaging method. D flip flop is embedded in the Tube package. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. The operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74LVC series. In order for it to function properly, its output frequency should not exceed 150MHz. The element count is 1 . This process consumes 10μA quiescents. There have been 20 terminations. The 74LVC374family includes it. The power source is powered by 2.7V. Its input capacitance is 4pF farads. LVC/LCX/Zis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. This flip flop is designed with 8 Bits. Vsup reaches 3.6V, the maximal supply voltage. The flip flop has 2embedded ports. It has 8lines. There is 100nA quiescent current consumption by it.

74LVC374ADB,112 Features

Tube package
74LVC series
20 pins
8 Bits

74LVC374ADB,112 Applications

There are a lot of Nexperia USA Inc. 74LVC374ADB,112 Flip Flops applications.

• Frequency division
• Balanced 24 mA output drivers
• CMOS Process
• Safety Clamp
• Frequency Divider circuits
• Bus hold
• Common Clocks
• Single Down Count-Control Line
• Parallel data storage
• Clock pulse