MC74VHC574DWR2 Overview

It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tape & Reel (TR)package. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74VHCseries contain this type of chip. A frequency of 115MHzshould be the maximum output frequency. In total, it contains 1 elements. This process consumes 4μA quiescents. There have been 20 terminations. You can search similar parts based on 74VHC574. A voltage of 3.3V is used to power it. This T flip flop has a capacitance of 4pF farads at the input. It belongs to the family of electronic devices known as AHC/VHC. Surface Mount mounts this electronic component. It is designed with 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part with 8bits has been designed. It reaches the maximum supply voltage (Vsup) at 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 2V. Its flexibility is enhanced by 8 circuits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It runs on 2/5.5Vvolts of power. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It operates with 3 output lines.

MC74VHC574DWR2 Features

Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies

MC74VHC574DWR2 Applications

There are a lot of ON Semiconductor MC74VHC574DWR2 Flip Flops applications.

• Clock pulse
• Data transfer
• Dynamic threshold performance
• Bus hold
• Asynchronous counter
• ESD protection
• Individual Asynchronous Resets
• ESCC
• 2 – Bit synchronous counter
• ATE