74AHC374D,112 Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 2V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74AHC series. Its output frequency should not exceed 120MHz. A total of 1elements are present in it. There is a consumption of 4μAof quiescent energy. Currently, there are 20 terminations. The 74AHC374 family contains it. It is powered by a voltage of 5V . A 3pFfarad input capacitance is provided by this T flip flop. AHCis the family of this D flip flop. A part of the electronic system is mounted in the way of Surface Mount. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. The flip flop is designed with 8bits. For normal operation, the supply voltage (Vsup) should be above 2V. The flip flop has 2embedded ports. For high efficiency, the supply voltage should be kept at 5V. As of now, there are 8input lines.

74AHC374D,112 Features

Tube package
74AHC series
20 pins
8 Bits

74AHC374D,112 Applications

There are a lot of Nexperia USA Inc. 74AHC374D,112 Flip Flops applications.

• Computers
• Load Control
• EMI reduction circuitry
• Guaranteed simultaneous switching noise level
• ESD performance
• Supports Live Insertion
• CMOS Process
• Bus hold
• Frequency division
• Divide a clock signal by 2 or 4