SN74AS574DWR Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas the output. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Temperature is set to 0°C~70°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74AS series. You should not exceed 90MHzin the output frequency of the device. D latch consists of 1 elements. As a result, it consumes 116mA quiescent current and is not affected by external forces. Currently, there are 20 terminations. The 74AS574family includes it. A voltage of 5V is used to power it. It belongs to the family of electronic devices known as AS. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. There are 8bits in its design. Its flexibility is enhanced by 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. It operates from 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. For high efficiency, the supply voltage should be kept at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 48mA. Currently, there are 3 input lines present.

SN74AS574DWR Features

Tape & Reel (TR) package
74AS series
20 pins
8 Bits
5V power supplies

SN74AS574DWR Applications

There are a lot of Texas Instruments SN74AS574DWR Flip Flops applications.

• EMI reduction circuitry
• Data Synchronizers
• Bus hold
• Cold spare funcion
• Patented noise
• Shift Registers
• Power down protection
• Asynchronous counter
• Computing
• Data storage