74F273PC Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. A package named Tubeincludes it. It is configured with Non-Invertedas an output. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. It is at 0°C~70°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74F series. There should be no greater frequency than 160MHzon its output. A total of 1elements are contained within it. It consumes 44mA of quiescent current without being affected by external factors. D latch belongs to the 74F273 family. A part of the electronic system is mounted in the way of Through Hole. The electronic flip flop is designed with pins 20. This device's clock edge trigger type is Positive Edge. This flip flop is designed with 8 Bits. The superior flexibility of this circuit is achieved by using 8 circuits. The supply voltage should be maintained at 5V for high efficiency. With an output current of 20mA, this device offers maximum design flexibility. It is designed with 3 output lines. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. In this case, the high level output current is set to -1mA. There is 20mA output current at the low level. It is recommended that the operating temperature be below 70°C. If the operating temperature is higher than 0°C, the system should operate properly. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. It is possible to achieve 95MHz frequencies.
74F273PC Features
Tube package
74F series
20 pins
8 Bits
74F273PC Applications
There are a lot of ON Semiconductor 74F273PC Flip Flops applications.
- Supports Live Insertion
- Convert a momentary switch to a toggle switch
- ESD performance
- Divide a clock signal by 2 or 4
- Frequency division
- Set-reset capability
- Test & Measurement
- Event Detectors
- Data transfer
- EMI reduction circuitry
