74LVTH574MSA Overview
The flip flop is packaged in 20-SSOP (0.209, 5.30mm Width). The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. A 2.7V~3.6Vsupply voltage is required for it to operate. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. It belongs to the 74LVTHseries of FPGAs. It should not exceed 150MHzin its output frequency. There are 1 elements in it. As a result, it consumes 190μA quiescent current. The number of terminations is 20. The D flip flop is powered by a voltage of 3.3V . A JK flip flop with a 4pFfarad input capacitance is used here. Devices in the LVTfamily are electronic devices. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. A normal operating voltage (Vsup) should remain above 2.7V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is also characterized by BROADSIDE VERSION OF 374.
74LVTH574MSA Features
Tube package
74LVTH series
74LVTH574MSA Applications
There are a lot of Rochester Electronics, LLC 74LVTH574MSA Flip Flops applications.
- Event Detectors
- Convert a momentary switch to a toggle switch
- Asynchronous counter
- Bounce elimination switch
- Counters
- Modulo – n – counter
- Load Control
- Circuit Design
- Synchronous counter
- Communications
