SN74HCT374NSRG4 Overview
It is embeded in 20-SOIC (0.209, 5.30mm Width) case. You can find it in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to -40°C~85°C TA. This D latch has the type D-Type. The FPGA belongs to the 74HCT series. Its output frequency should not exceed 40MHz. The element count is 1 . It consumes 8μA of quiescent current without being affected by external factors. This JK flip flop has a 3pFfarad input capacitance.
SN74HCT374NSRG4 Features
Tape & Reel (TR) package
74HCT series
SN74HCT374NSRG4 Applications
There are a lot of Rochester Electronics, LLC SN74HCT374NSRG4 Flip Flops applications.
- Differential Individual
- Reduced system switching noise
- Balanced Propagation Delays
- Synchronous counter
- Data transfer
- Pattern generators
- Common Clocks
- Storage registers
- Memory
- Load Control
