74F379SC Overview

In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. The package Tubecontains it. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. 0°C~70°C TAis the operating temperature. This D latch has the type D-Type. The FPGA belongs to the 74F series. There should be no greater frequency than 140MHzon its output. In total, it contains 1 elements. There is a consumption of 40mAof quiescent energy. JK flip flop belongs to 74F379 family. There is an electronic part mounted in the way of Surface Mount. This board has 16 pins. Its clock edge trigger type is Positive Edge. Flip flops designed with 4bits are used in this part. To achieve this superior flexibility, 4 circuits are used. Optimal efficiency requires a supply voltage of 5V. To operate, the chip has a total of 3 output lines. A total of 4input lines have been provided. It is set to -1mAfor the high level output current. Low level output current is set to 20mA. It is recommended that the operating temperature be below 70°C. Temperatures above 0°Cshould be used. It operates with the minimal supply voltage of 4.5V. There is a maximum voltage support of 5.5V. It is possible to achieve a frequency of 140MHz.

74F379SC Features

Tube package
74F series
16 pins
4 Bits

74F379SC Applications

There are a lot of ON Semiconductor 74F379SC Flip Flops applications.

• Instrumentation
• Patented noise
• Storage registers
• Circuit Design
• Storage Registers
• Balanced Propagation Delays
• Frequency division
• Counters
• Control circuits
• CMOS Process