MC74HC374ADTR2G Overview

The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. A temperature of -55°C~125°C TAis used in the operation. The type of this D latch is D-Type. This type of FPGA is a part of the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. A total of 1 elements are present. Terminations are 20. If you search by 74HC374, you will find similar parts. It is powered by a voltage of 3V . This T flip flop has a capacitance of 10pF farads at the input. Devices in the HC/UHfamily are electronic devices. Surface Mount mounts this electronic component. 20pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. The flip flop is designed with 8bits. As soon as 6Vis reached, Vsup reaches its maximum value. Normal operation requires a supply voltage (Vsup) above 2V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The power supply is 2/6V. A D flip flop with 2embedded ports is available. There are no output lines on the JK flip flop. It consumes 4μA of quiescent current without being affected by external factors. A total of 8 channels are available.

MC74HC374ADTR2G Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies

MC74HC374ADTR2G Applications

There are a lot of ON Semiconductor MC74HC374ADTR2G Flip Flops applications.

• Balanced Propagation Delays
• Functionally equivalent to the MC10/100EL29
• Single Up Count-Control Line
• Memory
• 2 – Bit synchronous counter
• Storage Registers
• Test & Measurement
• Safety Clamp
• Data Synchronizers
• Memory