MC74HCT574ADWG Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). A package named Tubeincludes it. Tri-State, Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at a temperature of -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. You should not exceed 30MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. Terminations are 20. Members of the 74HCT574family make up this object. A voltage of 5V is used to power it. This T flip flop has a capacitance of 10pF farads at the input. In terms of electronic devices, this device belongs to the HCTfamily of devices. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. An electronic part with 8bits has been designed. Considering the reliability of this T flip flop, it is well suited for RAIL. There are 5V power supplies attached to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It offers maximum design flexibility with its output current of 6mA. It has 3 output lines to operate. 8is the number of channels.

MC74HCT574ADWG Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

MC74HCT574ADWG Applications

There are a lot of ON Semiconductor MC74HCT574ADWG Flip Flops applications.

• Communications
• Event Detectors
• Functionally equivalent to the MC10/100EL29
• Digital electronics systems
• 2 – Bit synchronous counter
• Individual Asynchronous Resets
• Load Control
• Set-reset capability
• Dynamic threshold performance
• Frequency Divider circuits