MPSA14RLRAG Overview
In this device, the DC current gain is 20000 @ 100mA 5V, which is calculated by taking the ratio of the base current to collector current and dividing transistor by two.A collector emitter saturation voltage of 1.5V allows maximum design flexibility.In VCE saturation, Ic is at its maximum value (saturated), and the vce saturation (Max) is 1.5V @ 100μA, 100mA.In order to achieve high efficiency, the continuous collector voltage should be kept at 500mA.Keeping the emitter base voltage at 10V can result in a high level of efficiency.According to definition, current rating describes the maximum current a fuse can carry indefinitely without deteriorating too much, and this device has no current rating.The part has a transition frequency of 125MHz.This device can take an input voltage of 30V volts before it breaks down.The maximum collector current is 500mA volts.
MPSA14RLRAG Features
the DC current gain for this device is 20000 @ 100mA 5V
a collector emitter saturation voltage of 1.5V
the vce saturation(Max) is 1.5V @ 100μA, 100mA
the emitter base voltage is kept at 10V
the current rating of this device is 500mA
a transition frequency of 125MHz
MPSA14RLRAG Applications
There are a lot of ON Semiconductor MPSA14RLRAG applications of single BJT transistors.
- Driver
- Muting
- Inverter
- Interface
