MC74ACT377NG Overview

It is packaged in the way of 20-DIP (0.300, 7.62mm). It is included in the package Tube. This output is configured with Non-Inverted. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. It should not exceed 140MHzin terms of its output frequency. In total, there are 1 elements. There is a consumption of 8μAof quiescent energy. It has been determined that there have been 20 terminations. It is powered by a voltage of 5V . A 4.5pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the ACTfamily. Vsup reaches its maximum value at 5.5V. Normally, the supply voltage (Vsup) should be above 4.5V.

MC74ACT377NG Features

Tube package
74ACT series

MC74ACT377NG Applications

There are a lot of Rochester Electronics, LLC MC74ACT377NG Flip Flops applications.

• Pattern generators
• Bus hold
• ATE
• Data transfer
• Instrumentation
• QML qualified product
• CMOS Process
• Common Clocks
• Single Down Count-Control Line
• Buffer registers