SN74HCT374N Overview

20-DIP (0.300, 7.62mm)is the packaging method. The package Tubecontains it. The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electronic component mounted in the way of Through Hole. The JK flip flop operates at 4.5V~5.5Vvolts. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. You should not exceed 40MHzin the output frequency of the device. A total of 1 elements are present. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74HCT374 family contains it. It is powered by a voltage of 5V . This JK flip flop has a 3pFfarad input capacitance. It belongs to the family of electronic devices known as HCT. There is an electronic part that is mounted in the way of Through Hole. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. It runs on 5Vvolts of power. The D flip flop has no ports embedded. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Its output current of 6mAallows for maximum design flexibility. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. It consumes a total of 8μA quiescent current at any given time. Currently, there are 8 channels available.

SN74HCT374N Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

SN74HCT374N Applications

There are a lot of Texas Instruments SN74HCT374N Flip Flops applications.

• Storage Registers
• Event Detectors
• 2 – Bit synchronous counter
• Bounce elimination switch
• Safety Clamp
• Shift registers
• Counters
• Dynamic threshold performance
• ESCC
• Latch-up performance