N74F821N,602 Overview

24-DIP (0.300, 7.62mm)is the way it is packaged. It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. 0°C~70°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. The 74Fseries comprises this type of FPGA. You should not exceed 180MHzin its output frequency. A total of 1elements are contained within it. This process consumes 105mA quiescents. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74F821family includes it. Power is provided by a 5V supply. The electronic device belongs to the F/FASTfamily. There is a base part number FF/Latchesfor the RS flip flops. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be above 4.5V. The power supply is 5V. A D flip flop with 2embedded ports is available. As an additional reference, you may refer to electronic flip flop POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION.

N74F821N,602 Features

Tube package
74F series
5V power supplies

N74F821N,602 Applications

There are a lot of NXP USA Inc. N74F821N,602 Flip Flops applications.

• Frequency Dividers
• Reduced system switching noise
• Cold spare funcion
• Latch-up performance
• Convert a momentary switch to a toggle switch
• Test & Measurement
• Power down protection
• Count Modes
• Storage Registers
• Shift Registers