CD74HC4316NSR Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. A 4.5V voltage supply should turn on and run the electronic component. This electronic part can be found in the 16 series. The analog switch ics are built using SPST - NO switching circuits. Try searching for the analog switch ic with 74HC4316 if you are looking for variants. There is 170Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 2V voltage fed to the electrical part below 2V. Putting voltage greater than 16μA on the multiplexer may cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 5V. In the case of dual power supplies, you should connect at least 1V. The transfer of data can be performed over 200MHz bandwidths. Additional features of the electronic component include: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.

CD74HC4316NSR Features

4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
Additional Features: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY

CD74HC4316NSR Applications

There are a lot of Texas Instruments CD74HC4316NSR Analog Switches & Multiplexers ICs applications.

• ISDN NT1/TA
• Relay Replacement
• Digital Cross-Connects
• Digital cross connects (DSX-1)
• PBXs
• Fiber to the Home
• High-Voltage
• CSU
• Power routing
• Industrial