SN74ACT534NSR Overview

The flip flop is packaged in 20-SOIC (0.209, 5.30mm Width). It is contained within the Tape & Reel (TR)package. T flip flop uses Tri-State, Invertedas the output. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. -40°C~85°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74ACTseries contain this type of chip. It should not exceed 100MHzin terms of its output frequency. D latch consists of 1 elements. T flip flop consumes 4μA quiescent energy. 20terminations have occurred. Members of the 74ACT534family make up this object. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 4.5pFfarad input capacitance. This D flip flop belongs to the family of ACT. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. An electronic part with 8bits has been designed. The superior flexibility of this product is achieved by using 8 circuits. Considering the reliability of this T flip flop, it is well suited for TR. The D latch operates on 5V volts. The D flip flop has no ports embedded. If high efficiency is desired, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 24mA . The number of input lines is 3.

SN74ACT534NSR Features

Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT534NSR Applications

There are a lot of Texas Instruments SN74ACT534NSR Flip Flops applications.

• Guaranteed simultaneous switching noise level
• Safety Clamp
• Memory
• Set-reset capability
• Shift registers
• QML qualified product
• Counters
• Supports Live Insertion
• Power down protection
• Control circuits