SN74AS174DRE4 Overview

16-SOIC (0.154, 3.90mm Width)is the way it is packaged. A package named Tape & Reel (TR)includes it. The output it is configured with uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. It is at 0°C~70°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74ASseries contain this type of chip. There should be no greater frequency than 100MHzon its output. The element count is 1 . There is a consumption of 45mAof quiescent energy. A total of 16terminations have been recorded. The 74AS174 family contains this object. A voltage of 5V is used as the power supply for this D latch. A device of this type belongs to the family of AS. It is mounted in the way of Surface Mount. This board has 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchesbase part number family. 5.5Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 4.5V for normal operation. The superior flexibility is achieved through the use of 7 circuits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. Its output current of 20mAallows for maximum design flexibility. To operate, the chip has a total of 2 output lines. This input has 3lines.

SN74AS174DRE4 Features

Tape & Reel (TR) package
74AS series
16 pins

SN74AS174DRE4 Applications

There are a lot of Texas Instruments SN74AS174DRE4 Flip Flops applications.

• Balanced Propagation Delays
• Load Control
• Counters
• Safety Clamp
• Individual Asynchronous Resets
• QML qualified product
• 2 – Bit synchronous counter
• Modulo – n – counter
• Buffer registers
• Storage Registers