SN74BCT29821DWRE4 Overview
As a result, it is packaged as 24-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. The output it is configured with uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 4.5V~5.5V volts, it operates. 0°C~70°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74BCT series. There should be no greater frequency than 125MHzon its output. A total of 1elements are contained within it. T flip flop consumes 10mA quiescent energy. Terminations are 24. If you search by 74BCT29821, you will find similar parts. The D flip flop is powered by a voltage of 5V . The input capacitance of this JK flip flopis 5.5pF farads. A device of this type belongs to the family of BCT/FBT. This electronic part is mounted in the way of Surface Mount. This board has 24 pins. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part designed with 10bits is used in this application. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It runs on 5Vvolts of power. The flip flop has 2ports embedded within it. There are 10 output lines in this JK flip flop.
SN74BCT29821DWRE4 Features
Tape & Reel (TR) package
74BCT series
24 pins
10 Bits
5V power supplies
SN74BCT29821DWRE4 Applications
There are a lot of Texas Instruments SN74BCT29821DWRE4 Flip Flops applications.
- Latch
- 2 – Bit synchronous counter
- Shift Registers
- Clock pulse
- ESD performance
- Memory
- Frequency division
- Computers
- Single Up Count-Control Line
- Control circuits
