SN74LVC2G74QDCURQ1 Overview

As a result, it is packaged as 8-VFSOP (0.091, 2.30mm Width). D flip flop is included in the Tape & Reel (TR)package. In the configuration, Differentialis used as the output. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. A 1.65V~5.5Vsupply voltage is required for it to operate. -40°C~125°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the Automotive, AEC-Q100, 74LVC series. There should be no greater frequency than 140MHzon its output. 8terminations have occurred. The 74LVC2G74 family contains it. A voltage of 1.8V is used as the power supply for this D latch. A 5pFfarad input capacitance is provided by this T flip flop. Devices in the LVC/LCX/Zfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. The 8pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. It is designed with a number of bits of 1. Vsup reaches its maximum value at 5.5V. On the basis of its reliable performance, this D flip flop is well suited for use with TR. In order for the device to operate, it requires 3.3V power supplies. With an output current of 24mA, it is possible to design the device in any way you want. It consumes 10μA current. Currently, there are 1 channels available. In its basic form, it contains 2 gates.

SN74LVC2G74QDCURQ1 Features

Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates

SN74LVC2G74QDCURQ1 Applications

There are a lot of Texas Instruments SN74LVC2G74QDCURQ1 Flip Flops applications.

• Latch
• Test & Measurement
• Frequency division
• Shift Registers
• Differential Individual
• Storage Registers
• Automotive
• Set-reset capability
• QML qualified product
• Parallel data storage