SN74S374DWRG4 Overview

The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis required for its operation. In the operating environment, the temperature is 0°C~70°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74S series. You should not exceed 100MHzin the output frequency of the device. In total, it contains 1 elements. It consumes 110mA of quiescent 20terminations have occurred. Members of the 74S374family make up this object. Power is provided by a 5V supply. A device of this type belongs to the family of S. There is an electronic component mounted in the way of Surface Mount. The 20pins are designed into the board. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latches. This flip flop is designed with 8 Bits. As soon as Vsup reaches 5.25V, the maximum supply voltage is reached. It is imperative that the supply voltage (Vsup) is maintained above 4.75Vin order to ensure normal operation. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. In order for the device to operate, it requires 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Currently, there are 8 input lines present. -6.5mAis the output current at high level. There is no low level output current set at 20mA.

SN74S374DWRG4 Features

Tape & Reel (TR) package
74S series
20 pins
8 Bits
5V power supplies

SN74S374DWRG4 Applications

There are a lot of Texas Instruments SN74S374DWRG4 Flip Flops applications.

• Communications
• Latch-up performance
• Power down protection
• Event Detectors
• Digital electronics systems
• Common Clocks
• Modulo – n – counter
• Control circuits
• QML qualified product
• Computing