Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG1604BRUZ

ADG1604BRUZ

ADG1604BRUZ

Analog Devices Inc.

95ns, 173ns SP4T 1.1Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1604 14 Pins 200pA 5V 14-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG1604BRUZ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 20 Weeks
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 14
Operating Temperature -40°C~125°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Resistance 1Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 2.8mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG1604
Pin Count 14
Operating Supply Voltage 5V
Number of Channels 4
Interface Parallel
Number of Circuits 1
Max Supply Voltage 16V
Min Supply Voltage 3.3V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Nominal Supply Current 230μA
Power Dissipation 2.8mW
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 3.3V~16V ±3.3V~8V
Bandwidth 19MHz
Supply Current-Max (Isup) 0.36mA
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 95 ns
Max Dual Supply Voltage 8V
On-State Resistance (Max) 1.1Ohm
Min Dual Supply Voltage 3.3V
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 70 dB
Current - Leakage (IS(off)) (Max) 200pA
Channel Capacitance (CS(off), CD(off)) 60pF 270pF
On-state Resistance Match-Nom 0.04Ohm
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 95ns, 173ns
Charge Injection 125pC
Channel-to-Channel Matching (ΔRon) 30m Ω
Crosstalk -70dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 1Ohm
Signal Current-Max 0.378A
Height 1.05mm
Length 5.1mm
Width 4.5mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $6.18000 $6.18
500 $6.1182 $3059.1
1000 $6.0564 $6056.4
1500 $5.9946 $8991.9
2000 $5.9328 $11865.6
2500 $5.871 $14677.5
ADG1604BRUZ Product Details

ADG1604BRUZ Overview


Packed in 14-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. The operating temperature is extended to around -40°C~125°C TA. In total, there are 14 terminations. Due to its 4 channels, the electrical component produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 14 series. These analog multiplexers are built based on SP4T switching circuits. Circuits number 1 make up this analogue multiplexer. Search with ADG1604 if you are looking for analog multiplexer variants. There is 1Ohm internal resistance in this digital multiplexer. You can find the functions of the 14 pins in the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16V. 3.3V is the lowest voltage that should be fed to the electronic electronic part. There is no problem with using dual supply voltage, but it should not exceed 8V. The voltage should be at least 3.3V if you are using dual power supplies. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. It can operate from 5V operating voltages. It is possible to operate 4 inputs. 19MHz-bandwidths can be used to transfer data between multiplexers. Drain to Source resistance for this electronic component is 1Ohm.

ADG1604BRUZ Features


4 Channels
Switch Circuit: SP4T
Bandwidth: 19MHz
Drain-to-Source resistance: 1Ohm

ADG1604BRUZ Applications


There are a lot of Analog Devices Inc. ADG1604BRUZ Analog Switches & Multiplexers ICs applications.

  • Video switching
  • New designs requiring multiplexer functions
  • Public switching systems
  • High-Voltage
  • Precision instrumentation
  • Optical Applications
  • PBX interfaces
  • Private Branch Exchange (PBX)
  • Cellular phones
  • RGB switches

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News