FMMT624TC Overview

In this device, the DC current gain is 300 @ 200mA 10V, which is calculated by taking the ratio of the base current to collector current and dividing transistor by two.A collector emitter saturation voltage of 165mV allows maximum design flexibility.VCE saturation indicates Ic is at maximum level (saturated), whereas vce saturation (Max) indicates there is no saturation.A constant collector voltage of 1A is necessary for high efficiency.A high level of efficiency can be achieved if the base voltage of the emitter remains at 5V.Normally, a fuse's current rating refers to how much current it can carry without deteriorating too much, which in this case is 1A.In this part, there is a transition frequency of 155MHz.In extreme cases, the collector current can be as low as 1A volts.

FMMT624TC Features

the DC current gain for this device is 300 @ 200mA 10V
a collector emitter saturation voltage of 165mV
the vce saturation(Max) is 250mV @ 50mA, 1A
the emitter base voltage is kept at 5V
the current rating of this device is 1A
a transition frequency of 155MHz

FMMT624TC Applications

There are a lot of Diodes Incorporated FMMT624TC applications of single BJT transistors.

• Muting
• Inverter
• Interface
• Driver