IXFN64N50P Overview
This type of breakdown is known as "avalanche breakdown", and the energy applied to the MOSFET is called avalanche energy, and the avalanche energy rating (Eas) is 2500 mJ.The maximum input capacitance of this device is 8700pF @ 25V, because the input capacitance of an op amp is defined as the difference between the input terminals with one input grounded.Continuous drain current (ID) is the maximum continuous current (ID) the device can conduct, and it is 61A.When VGS=500V, and ID flows to VDS at 500VVDS, the drain-source breakdown voltage is 500V in this device.As shown in the table below, the drain current of this device is 50A.Before drain current conduction can begin, the device's turn-off delay time must be charged up to full capacitance. This value is 85 ns.During device turn-on, the input capacitance must be charged for a period of time before drain current conduction can begin, so its delay time is 30 ns seconds.Single MOSFETs transistor is the voltage across the gate-source terminal of a transistor that determines the gate-source voltage, VGS.This transistor's threshold voltage is 5.5V volts, which indicates that a transistor is ready to perform any of its operations at that voltage.Using drive voltage (10V), this device helps reduce its power consumption.
IXFN64N50P Features
the avalanche energy rating (Eas) is 2500 mJ
a continuous drain current (ID) of 61A
a drain-to-source breakdown voltage of 500V voltage
the turn-off delay time is 85 ns
a threshold voltage of 5.5V
IXFN64N50P Applications
There are a lot of IXYS
IXFN64N50P applications of single MOSFETs transistors.
- Micro Solar Inverter
-
- DC/DC converters
-
- Power Tools
-
- Motor Drives and Uninterruptible Power Supples
-
- Synchronous Rectification
-
- Battery Protection Circuit
-
- Telecom 1 Sever Power Supplies
-
- Industrial Power Supplies
-
- PFC stages, hard switching PWM stages and resonant switching
-
- PWM stages for e.g. PC Silverbox, Adapter, LCD & PDP TV,
-
