MC100EP35DG Overview

The flip flop is packaged in a case of 8-SOIC (0.154, 3.90mm Width). The Tubepackage contains it. As configured, the output uses Differential. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of -3V~-5.5Vis required for its operation. Temperature is set to -40°C~85°C TA. There is JK Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 100EP series. In order for it to function properly, its output frequency should not exceed 3GHz. A total of 8 terminations have been made. This D latch belongs to the family of 100EP35. The D flip flop is powered by a voltage of 3.3V . There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. This flip flop is designed with 2 Bits. 5.5Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 3V. Considering its reliability, this T flip flop is well suited for RAIL. The D latch operates on -4.5V volts. If high efficiency is to be achieved, the supply voltage should be maintained at 4.25V. With a current output of 50mA , it offers maximum design flexibility. In order for the chip to function, it has 1output lines. Additionally, you may refer to the D latch's additional NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V. In this case, the high level output current is set to -50mA. There is 50mA output current at the low level.

MC100EP35DG Features

Tube package
100EP series
8 pins
2 Bits
-4.5V power supplies

MC100EP35DG Applications

There are a lot of ON Semiconductor MC100EP35DG Flip Flops applications.

• High Performance Logic for test systems
• Functionally equivalent to the MC10/100EL29
• Pattern generators
• Data storage
• Convert a momentary switch to a toggle switch
• Buffer registers
• Circuit Design
• Latch
• Bus hold
• Matched Rise and Fall