CD74FCT273M96E4 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. Currently, the output is configured to use Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.75V~5.25V. Currently, the operating temperature is 0°C~70°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74FCT series. It should not exceed 70MHzin terms of its output frequency. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current. There are 20 terminations,It is a member of the 74FCT273 family. The D flip flop is powered by a voltage of 5V . There is 10pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as FCT. A part of the electronic system is mounted in the way of Surface Mount. This board has 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. 8bits are used in its design. The maximal supply voltage (Vsup) reaches 5.25V. For normal operation, the supply voltage (Vsup) should be kept above 4.75V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. Currently, there are 8 input lines present.
CD74FCT273M96E4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CD74FCT273M96E4 Applications
There are a lot of Texas Instruments CD74FCT273M96E4 Flip Flops applications.
- Single Up Count-Control Line
- Buffer registers
- Shift Registers
- Buffered Clock
- Power down protection
- Consumer
- Patented noise
- Reduced system switching noise
- Balanced 24 mA output drivers
- Computers
