SN74AC574PWRG4 Overview

The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). A package named Tape & Reel (TR)includes it. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74ACseries FPGA. There should be no greater frequency than 153MHzon its output. A total of 1 elements are present. There is 4μA quiescent consumption. A total of 20 terminations have been made. You can search similar parts based on 74AC574. It is powered from a supply voltage of 3.3V. A 4.5pFfarad input capacitance is provided by this T flip flop. Devices in the ACfamily are electronic devices. In this case, the electronic component is mounted in the way of Surface Mount. A total of 20pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 8bits is used in this application. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be kept above 2V. Using 8 circuits, it is highly flexible. This D flip flop is well suited for TR based on its reliable performance. The flip flop contains 2ports. As a result of its output current of 24mA, it is very flexible in terms of design. A total of 3input lines have been provided.

SN74AC574PWRG4 Features

Tape & Reel (TR) package
74AC series
20 pins
8 Bits

SN74AC574PWRG4 Applications

There are a lot of Texas Instruments SN74AC574PWRG4 Flip Flops applications.

• Common Clocks
• Reduced system switching noise
• Memory
• Event Detectors
• Data storage
• Computing
• Convert a momentary switch to a toggle switch
• Frequency Dividers
• Functionally equivalent to the MC10/100EL29
• Shift registers