CY74FCT377ATSOCTE4 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. It is configured with Non-Invertedas an output. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. It belongs to the 74FCTseries of FPGAs. The element count is 1 . T flip flop consumes 200μA quiescent energy. Terminations are 20. The 74FCT377 family contains this object. The power source is powered by 5V. There is 5pF input capacitance for this T flip flop. It is a member of the FCTfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. The flip flop is designed with 8bits. It reaches the maximum supply voltage (Vsup) at 5.25V. A normal operating voltage (Vsup) should remain above 4.75V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. With an output current of 64mA, it is possible to design the device in any way you want. Currently, there are 8 lines of input.
CY74FCT377ATSOCTE4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT377ATSOCTE4 Applications
There are a lot of Texas Instruments CY74FCT377ATSOCTE4 Flip Flops applications.
- Bounce elimination switch
- Counters
- Latch
- Common Clocks
- Memory
- Data transfer
- Divide a clock signal by 2 or 4
- Load Control
- Storage Registers
- Shift Registers
