SN74ALVCH374PW Overview

The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). The Tubepackage contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. With a supply voltage of 1.65V~3.6V volts, it operates. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. It belongs to the 74ALVCHseries of FPGAs. It should not exceed 150MHzin its output frequency. In total, there are 1 elements. As a result, it consumes 10μA of quiescent current without being affected by external factors. There are 20 terminations,You can search similar parts based on 74ALVCH374. A voltage of 1.8V provides power to the D latch. This T flip flop has a capacitance of 5pF farads at the input. It belongs to the family of electronic devices known as ALVC/VCX/A. Electronic part Surface Mountis mounted in the way. The 20pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 8bits in its design. The superior flexibility is achieved through the use of 8 circuits. The D flip flop is embedded with 2ports. With a current output of 24mA , it offers maximum design flexibility. This input has 3lines in it.

SN74ALVCH374PW Features

Tube package
74ALVCH series
20 pins
8 Bits

SN74ALVCH374PW Applications

There are a lot of Texas Instruments SN74ALVCH374PW Flip Flops applications.

• Modulo – n – counter
• Single Up Count-Control Line
• Matched Rise and Fall
• Synchronous counter
• High Performance Logic for test systems
• Frequency Dividers
• Dynamic threshold performance
• 2 – Bit synchronous counter
• Memory
• Automotive