SN74LVC74AMDREP Overview

It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 2V~3.6V. It is operating at a temperature of -55°C~125°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. It should not exceed 100MHzin terms of its output frequency. As a result, it consumes 10μA quiescent current. There have been 14 terminations. If you search by 74LVC74, you will find similar parts. It is powered by a voltage of 2.7V . This JK flip flop has a 5pFfarad input capacitance. An electronic device belonging to the family LVC/LCX/Zcan be found here. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. The clock edge trigger type for this device is Positive Edge. This RS flip flops is a part number FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 3.6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. 2 circuits are used to achieve its superior flexibility. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The power supply is 3.3V. To operate, the chip has a total of 1 output lines.

SN74LVC74AMDREP Features

Tape & Reel (TR) package
74LVC series
14 pins
3.3V power supplies

SN74LVC74AMDREP Applications

There are a lot of Texas Instruments SN74LVC74AMDREP Flip Flops applications.

• Registers
• Reduced system switching noise
• Differential Individual
• Control circuits
• Individual Asynchronous Resets
• Storage Registers
• Modulo – n – counter
• Set-reset capability
• ESCC
• Pattern generators